ProSoft Technology ICX35-HWC-E Industrial Cellular Gateway

ICX35-HWC-E is ProSoft Technology’s ETSI industrial cellular gateway. It provides 4G LTE connectivity with 3G fallback for remote SCADA sites and equipment access. Network service and the installed SIM must suit the ETSI radio bands.

ICX35-HWC-E is the ETSI variant, with LTE bands 1, 3, 7, 8 and 20 listed in ProSoft’s datasheet. Check local carrier support and the SIM service before planning a remote SCADA or telemetry link.

ICX35-HWC-E has one 10/100 Base-T Ethernet port, one DB9 serial port and two RP-SMA antenna ports, according to ProSoft. The Ethernet port can serve as LAN or WAN; antennas are listed separately from the gateway.

ICX35-HWC-E uses an external 10–30 VDC supply and is rated by ProSoft for operation from −40 to +70 °C. Match the installed power source and site environment to the manufacturer specifications before commissioning the gateway.

ICX35-HWC-E supports OpenVPN client connectivity, IP address filtering and remote access through its cellular or Internet link. ProSoft also describes EtherNet/IP and Modbus TCP/IP for gateway diagnostics. Configure these functions for the site's approved network architecture.

ICX35-HWC-E is identified by ProSoft as the discontinued ETSI model of the ICX35-HWC family. That notice does not establish a direct replacement. Confirm the exact radio variant and current supply options when sourcing the gateway.

ICX35-HWC-E should be ordered using its full ETSI model string. Provide the intended carrier and LTE bands, power supply, antenna arrangement and required Ethernet or serial use so the remote-site configuration can be checked.