GE Fanuc IC610MDL158 Series One 16-Point 24 V DC Source Output Module

IC610MDL158 provides sixteen 24 V DC source output circuits, with a documented operating range of 5–24 V DC. It is a sourcing output module, so the field wiring must follow the source-output diagram.

IC610MDL158 arranges its sixteen outputs in two groups of eight. All outputs may use one DC source, or each eight-circuit group may use a separate source as shown in the manufacturer’s wiring instructions.

IC610MDL158 has a maximum 0.5 A point rating that depends on ambient temperature and the number of circuits ON. Use the GE derating chart when checking simultaneous output loading, especially at higher ambient temperatures.

IC610MDL158 has two internal 5 A fuses in the output common lines, one for each group of eight circuits. These group fuses do not remove the need to observe the individual output-current and derating limits.

IC610MDL158 uses a removable screw-terminal board on the faceplate. GE specifies one No. 12 AWG conductor or two No. 14 AWG conductors per terminal, allowing the field wiring to be disconnected through that board.

IC610MDL158 has a specified 0.1 ms OFF-to-ON response and 1.0 ms ON-to-OFF response for resistive loads. Actual load behavior must also account for the connected device and its field supply.