GE Fanuc IC610CPU105 Series One Plus 700-Word CPU Module

IC610CPU105 provides 700 words standard; optional 1724 words of program storage in Series One Plus. Memory words are 16 bits; optional memory configurations must be matched to the fitted hardware and the documented CPU settings.

IC610CPU105 is the Series One Plus CPU documented in GEK-90842C. It supports ladder logic and data operations. Its generation must be distinguished from the original Series One CPU when selecting programs, peripherals and communications hardware.

IC610CPU105 belongs to Series One Plus, with a documented system limit of 168 I/O points. The installed point count depends on rack configuration, module types and addressing; the CPU designation alone does not specify the fitted I/O mix.

IC610CPU105 uses the IC610PRG105 hand-held programmer required for Series One Plus controllers. Select the programming equipment for the actual controller generation and preserve the existing application before servicing.

IC610CPU105 requires IC610CCM105 for the external communications configuration described by GE. Model E, One Plus and One Plus 3.7K use this DCU; the CPU is a slave during the documented host communications session.

IC610CPU105 supports the Series One Plus data-operation instruction set, including data moves, arithmetic and conversions. GE lists 64 16-bit data registers, with additional registers available by using unused timer/counter references.