GE DS200EXPSG1ABB EX2000 Bulk Power Supply Board

DS200EXPSG1ABB belongs to the EXPS family providing signals for AC and DC input-power measurement. GEI-100168 documents this board-level function; it does not establish a measurement range or accuracy specifically for the complete ABB revision.

DS200EXPSG1ABB belongs to the EXPS family providing current-limiting action when the bulk supply is energized by the station battery. The documented function identifies the source condition; the manual passage does not assign a numerical limiting current to ABB.

DS200EXPSG1ABB belongs to the EXPS family whose JP1 jumper connects the T1 secondary center tap to ground. GE’s replacement procedure requires matching the removed board’s setting; the correct setting is not inferred from the ABB suffix.

DS200EXPSG1ABB belongs to the EXPS family for which GE names DCPL, 3GDPL and 4GDPL in its replacement procedure. These are identified board interconnections, rather than a complete connector inventory or a claim about every connector’s pin count.

DS200EXPSG1ABB belongs to the EXPS family whose manufacturer procedure requires removal of the complete bulk power-supply assembly before board replacement. The documented process then handles the board connections and jumper configuration within that assembly.

DS200EXPSG1ABB retains every character of the requested EXPS ordering reference. GE instructs identification from the complete board-edge catalog number and warns that revision hardware may differ, so the installed assembly and removed board configuration must be matched.