Foxboro SRI986-CIDS7EAANA Electro-Pneumatic Valve Positioner

SRI986-CIDS7EAANA is a Foxboro SRI986 electro-pneumatic positioner. It uses an electrical current setpoint to position a pneumatic control-valve actuator; the complete code is listed by independent suppliers as a double-acting version.

SRI986-CIDS7EAANA is cross-listed with a 0/4–20 mA input and direct action, meaning increasing input increases the output. Match the controller output and required actuator action to the installed valve arrangement.

SRI986-CIDS7EAANA is listed as the double-acting SRI986 variant. The actuator, pneumatic connections and available supply must be checked against Schneider Electric’s SRI986 installation guidance for the actual assembly.

SRI986-CIDS7EAANA is cross-listed with an M20 × 1.5 cable entry and one gray plastic gland. Its listed configuration has no built-in limit switch or position transmitter; confirm auxiliary options on the complete order code.

SRI986-CIDS7EAANA belongs to the SRI986 electro-pneumatic positioner family for pneumatic control-valve actuators. The listed double-acting configuration is relevant where the installed actuator requires two pneumatic output actions.

SRI986-CIDS7EAANA requires the installed controller signal, actuator type, pneumatic supply and mounting arrangement to match the SRI986 instructions. Commission the zero and stroke only using the applicable manufacturer procedure for the fitted valve and accessories.

SRI986-CIDS7EAANA should be identified by its full suffix-bearing code. Provide the existing positioner nameplate, actuator type, signal range, cable-entry requirement and any separately ordered attachment kit or manifold so the requested configuration can be checked.