Bently Nevada 9755-17 Seismoprobe Test Cable

9755-17 uses the suffix 17 to specify a 17 ft cable. This is a physical interconnect-cable length ordered in one-foot increments, rather than the calibrated electrical length of an eddy-current proximity-probe system.

9755-17 has 2-pin female connectors at both ends. This 2-conductor connection must match the transducer and receiving instrument; it is not a BNC-ended cable.

9755-17 is listed by Bently Nevada for 9200 / 74712 Seismoprobe velocity transducers. It connects these velocity transducers to Bently Nevada test kits using female connectors at both ends; select the matching test-kit interface before use.

9755-17 uses 2-conductor shielded 22 AWG (0.5 mm²) cable. Its two-wire test connection serves compatible Seismoprobe equipment; do not replace it with a terminal-lug or BNC-ended variant solely because the length is similar.

9755-17 has a selected length of 17 ft within the documented 1 ft to 99 ft cable-family range. The manufacturer specifies -70 to +150 °C for this cable; the connected transducer and instrument retain their own operating limits.